Skip to product search

Skip to product list

Home » Drawer Pulls » Chippendale drawer pulls

Pulls and Keyhole Escutcheons

Pictured in antique and dark antique (oil rubbed bronze) finishes.

View purchasing info
The boring shown in bold is the recommended boring for new furniture.
 
 
CB-5: pull - overall size: 3-3/4" x 2-1/8"
    2-3/4" boring Price: $7.25  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
    2-1/2" boring Price: $7.25  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
    3" boring Price: $7.25  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
 
CB-5E: matching keyhole escutcheon
    overall size: 3-3/4" x 2-1/8" Price: $4.25  
       Finish (View Finishes): Quantity:  
 
CH-2: pull - overall size: 4-1/2" x 3-3/8"
    3" boring Price: $7.75  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
 
CH-2E: matching keyhole escutcheon
    overall size: 4-1/2" x 3-3/8" Price: $4.75  
       Finish (View Finishes): Quantity:  
See Related Categories:
Product Notes:
  • Do you need a complimentary vertical keyhole escutcheon or matching plate with a knob for the doors of an armoire or a secretary? Check out the desk hardware page.
  • All dimensions are measured width by height.
  • Hardware is available in several different finishes. 70% of our products are ordered in the antique finish. Read more about finishes »
  • Are there post holes in your furniture? The distance between them is called the boring. Learn how to measure borings »
  • Each Chippendale pull is made from solid brass and consists of a cast bail, a backplate, 2 posts, and 2 nuts. Escutcheons are supplied with solid brass pins.
  • The plate size of a matching keyhole escutcheon is exactly the same as the corresponding pull.
  • Posts are 1-1/4" long. Our machine screw posts come with screws for 3/4" to 7/8" wood. If your wood is thicker or thinner, please tell us in the notefield. We can provide screws for almost any thickness of wood with the machine screw fittings. If you are using a post and nut and your wood is thicker than 1-1/8", you will need to counterbore. See instructions »
  • If you order 12 or more, you'll receive our quantity pricing. Be sure to see our quantity discount information.
 
Have a question? Need something you cannot find in our catalog? Check our handy list of things we don't make and where to get them. Still can't find what you want? Contact us and we will do our best to help, and we will gladly send you to another supplier if they have what you need.