Skip to product search

Skip to product list

Home » Drawer Pulls » Hepplewhite

Hepplewhite Pulls

Delicate embossed oval pulls, stamped and finished one at a time. If you have existing holes, carefully measure from the middle of one hole to the middle of the other. This is called the boring. Then choose a pull with the same boring as yours. This way, you will not have to drill new holes and possibly affect the value of your antique piece.

View purchasing info
Did you know that if you live anywhere in the US, shipping will only cost $5.00? Our shipping charge is a flat fee, whether you order 1, 100 or even 1000 pieces!
 
 
H-91: concentric ovals, concave center - plate size: 2-7/8" x 1-7/8"
    boring: 2-1/4" Price: $8.50  
       Finish (View Finishes): Quantity:  
 
H-27: ribbed oval, concave center - plate size: 3-5/16" x 2-1/16"
    boring: 2-3/4" Price: $7.50  
       Finish (View Finishes): Quantity:  
 
H-37: convex center - plate size: 3-3/4" x 2-3/16"
    boring: 3" Price: $7.50  
       Finish (View Finishes): Quantity:  
    boring: 3-1/4" Price: $8.50  
       Finish (View Finishes): Quantity:  
 
H-2: eagle pattern - plate size: 3-5/8" x 2"
    boring: 3" Price: $7.50  
       Finish (View Finishes): Quantity:  
 
H-7: crossed cannon - plate size: 3-5/8" x 2"
    boring: 3" Price: $7.50  
       Finish (View Finishes): Quantity:  
 
H-11: large pull ideal for covering damage - plate size: 4-1/4" x 2-1/8"
    boring: 3-5/8" Price: $8.50  
       Finish (View Finishes): Quantity:  
 
H-9: large pull ideal for covering damage - plate size: 4-5/8" x 2-1/4"
    boring: 3" Price: $7.50  
       Finish (View Finishes): Quantity:  
See Related Categories:
Product Notes:
  • All hardware includes all fasteners needed for installation. You can order extra fasteners if you require them.
  • All dimensions are measured width by height.
  • Hardware is available in several different finishes. 70% of our products are ordered in the antique finish. Read more about finishes »
  • Are there post holes in your furniture? The distance between them is called the boring. Learn how to measure borings »
  • Posts are 1-1/4" long. Our machine screw posts come with screws for 3/4" to 7/8" wood. If your wood is thicker or thinner, please tell us in the notefield. We can provide screws for almost any thickness of wood with the machine screw fittings. If you are using a post and nut and your wood is thicker than 1-1/8", you will need to counterbore. See instructions »
  • Need a drawer pull for an existing piece? First measure the boring. The boring is the distance from the middle of one hole to the middle of the other. Choose your pull among those with matching borings. Then check the overall size to make sure the pull will fit on your drawer. And finally decide on the finish you prefer.
  • If you order 12 or more, you'll receive our quantity pricing. Be sure to see our quantity discount information.
 
Donna's Bio Donna is our office manager, and holds down the fort no matter how busy we get. Donna has been with Horton Brasses since 1985 and has lots of experience in billing, special problems and requests, credit applications, posting, and just about anything else that you can think of.