Skip to product search

Skip to product list

Home » Drawer Pulls » Rosette drawer pulls

Drop Pulls & Round Escutcheons

These drop pulls and round escutcheons are designed to match the beautiful H-10 Rosette Pulls.

View purchasing info

Matching drop pulls

with round backplates
These drop pulls match our H-10 rosette pulls and will look beautiful if used together. The drops can be used for doors and the H-10 rosette pulls can be used for drawers.
 
 
H-83: matching stirrup pull - 1-5/8" across bow
    backplate diameter: 1" Price: $7.00  
       Finish (View Finishes): Quantity:  
    backplate diameter: 1-1/8" Price: $7.00  
       Finish (View Finishes): Quantity:  
 
H-24: matching teardrop pull - with cotter pin fitting
    overall size: 1-1/8" x 2-1/4" Price: $5.00  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    

Round Escutcheons

 
H-13: round keyhole escutcheon
    diameter: 1-1/8" Price: $2.00  
       Finish (View Finishes): Quantity:  
    diameter: 1-1/4" Price: $2.00  
       Finish (View Finishes): Quantity:  
See Related Categories:
Product Notes:
  • All hardware includes all fasteners needed for installation. You can order extra fasteners if you require them.
  • All dimensions are measured width by height.
  • Hardware is available in several different finishes. 70% of our products are ordered in the antique finish. Read more about finishes »
  • Cotter pin fitting is an early method of fastening hardware and dates back to the 1600s. See installation instructions »
  • A rosette pull consists of 1 cast brass swan bail and 2 solid brass backplates with posts and nuts. Please tell us (in the comments area during checkout) if your drawer front is curved and we will provide special posts so that your bail will swing freely. There is no charge for this service.
  • Posts are 1-1/4" long. Our machine screw posts come with screws for 3/4" to 7/8" wood. If your wood is thicker or thinner, please tell us in the notefield. We can provide screws for almost any thickness of wood with the machine screw fittings. If you are using a post and nut and your wood is thicker than 1-1/8", you will need to counterbore. See instructions »
  • If you order 12 or more, you'll receive our quantity pricing. Be sure to see our quantity discount information.
 

Make a mistake in measuring? Have a change in plans? No problem! Hardware is returnable for a refund or exchange, as you wish.

If we make a mistake, we will correct it immediately, just give us a call and let us know.

If you make a mistake, there are only two charges we do not refund: shipping and the Bright charge. The Bright charge is a labor charge and cannot be refunded. Shipping is not refunded for obvious reasons.