Skip to product search

Skip to product list

Home » Drawer Pulls » Rosette drawer pulls

Rosette Pulls

Lovely Rosette pulls and matching escutcheons.

View purchasing info

Rosette Pulls

with oval backplates
matching escutcheons
matching keyhole escutcheons »
Please tell us (in the comments box during checkout) if your drawer front is curved and we will provide special posts so that your bail will swing freely. There is no charge for this service.
 
 
H-14: keyhole escutcheon - shown in bright
    1-1/8" x 1-1/2" Price: $2.00  
       Finish (View Finishes): Quantity:  
 
H-31FB: rosette drawer pull w/fancy bail - pictured in semi-bright »
    boring: 3" w/ oval backplates: 7/8" x 1-3/16" Price: $6.75  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
    boring: 3-1/2" w/ oval backplates: 1-1/8" x 1-1/2" Price: $6.75  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
 
H-31S: rosette drawer pull w/ oval backplates: 7/8" x 1-3/16" - pictured in antique brass
    boring: 2-1/2" Price: $6.75  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
    boring: 2-3/4" Price: $6.75  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
    boring: 3" Price: $6.75  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
 
H-31: rosette drawer pull w/ oval backplates: 1-1/8" x 1-1/2" - pictured in antique brass
    boring: 3-1/4" Price: $7.50  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
    boring: 3-1/2" Price: $7.50  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
    boring: 3-3/4" Price: $8.50  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
    boring: 4" Price: $8.50  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
See Related Categories:
Product Notes:
  • All hardware includes all fasteners needed for installation. You can order extra fasteners if you require them.
  • All dimensions are measured width by height.
  • Hardware is available in several different finishes. 70% of our products are ordered in the antique finish. Read more about finishes »
  • Are there post holes in your furniture? The distance between them is called the boring. Learn how to measure borings »
  • A rosette pull consists of 1 cast brass swan bail and 2 solid brass backplates with posts and nuts. Please tell us (in the comments area during checkout) if your drawer front is curved and we will provide special posts so that your bail will swing freely. There is no charge for this service.
  • Posts are 1-1/4" long. Our machine screw posts come with screws for 3/4" to 7/8" wood. If your wood is thicker or thinner, please tell us in the notefield. We can provide screws for almost any thickness of wood with the machine screw fittings. If you are using a post and nut and your wood is thicker than 1-1/8", you will need to counterbore. See instructions »
  • Need a drawer pull for an existing piece? First measure the boring. The boring is the distance from the middle of one hole to the middle of the other. Choose your pull among those with matching borings. Then check the overall size to make sure the pull will fit on your drawer. And finally decide on the finish you prefer.
  • If you order 12 or more, you'll receive our quantity pricing. Be sure to see our quantity discount information.
 
Donna's Bio Donna is our office manager, and holds down the fort no matter how busy we get. Donna has been with Horton Brasses since 1985 and has lots of experience in billing, special problems and requests, credit applications, posting, and just about anything else that you can think of.