Skip to product search

Skip to product list

Home » As Seen In » Popular Woodworking » December 2006 » H-17

Pulls and Keyhole Escutcheons

Pictured in our bright finish.

View purchasing info
Glen Huey chose this pull in the smaller size in the semi-bright finish for his Lingerie Chest. The piece and plans are featured in the December 2006 issue of Popular Woodworking.
H-17 is a dressy pull, available in 2 plates sizes. It is not too tall and is well suited to drawers that do not have too much height. Available in 4 finishes: antique brass, dark antique, bright and semi-bright.
 
 
H-17: pull - overall size: 3-1/4" x 2"
    2-1/2" boring Price: $7.25  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
    2" boring Price: $7.25  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
 
H-17E: matching keyhole escutcheon
    overall size: 3-1/4" x 2" Price: $4.25  
       Finish (View Finishes): Quantity:  
 
H-17L: pull - overall size: 4" x 2-1/2"
    3" boring Price: $7.75  
       Finish (View Finishes): Quantity:  
       Fitting (About Fittings):    
 
H-17LE: matching keyhole escutcheon
    overall size: 4" x 2-1/2" Price: $4.75  
       Finish (View Finishes): Quantity:  
See Related Categories:
Product Notes:
  • Do you need a complimentary vertical keyhole escutcheon or matching plate with a knob for the doors of an armoire or a secretary? Check out the desk hardware page.
  • All dimensions are measured width by height.
  • Hardware is available in several different finishes. 70% of our products are ordered in the antique finish. Read more about finishes »
  • Are there post holes in your furniture? The distance between them is called the boring. Learn how to measure borings »
  • Each Chippendale pull is made from solid brass and consists of a cast bail, a backplate, 2 posts, and 2 nuts. Escutcheons are supplied with solid brass pins.
  • The plate size of a matching keyhole escutcheon is exactly the same as the corresponding pull.
  • Posts are 1-1/4" long. Our machine screw posts come with screws for 3/4" to 7/8" wood. If your wood is thicker or thinner, please tell us in the notefield. We can provide screws for almost any thickness of wood with the machine screw fittings. If you are using a post and nut and your wood is thicker than 1-1/8", you will need to counterbore. See instructions »
  • If you order 12 or more, you'll receive our quantity pricing. Be sure to see our quantity discount information.
 
Using Quality Hardware
Finish: You've strived to get your wood to glow. The brasses need to accentuate that effort. A beautiful finish is the final step.