This Flat Top Highboy is made with tiger maple and has over 195 handcut dovetails in it, 2 hidden drawers, and hardware from Horton Brasses. It looked great and then I put the hardware on it and it almost came to life. Thanks everyone at Horton Brasses for making this piece look its best.
Customer Projects
Have you used our products on a project you’re proud of?
Post a photo and a description of your project and we will feature it on our site! We’re especially looking for photos containing Art Deco, Victorian, Mackintosh, or iron hardware.
Slant Lid Secretary
- Posted on Tuesday, May 4, 2010 - 2 comments
I made this out of Tiger maple and put the hardware from Horton Brasses on it and it just looks amazing. I am sold on hardware from Horton Brasses.
Mahogany Bedside Tables by Doucette and Wolfe Furniture Makers
- Posted on Tuesday, April 13, 2010 - leave a comment
These bedside tables are made of Mahogany as the primary wood, and poplar as the secondary. The tops are both ribbon striped. We used sheraton knobs (H-30). The tables are finished in a few coats of garnet shellac, with a colored wax at the end.
Queen Anne chest of drawers
- Posted on Monday, April 12, 2010 - leave a comment
This Queen Anne chest of drawers is based on a piece built in 1750 by John and Job Townsend in Newport, RI. I choose cherry as the primary wood for this piece. We have a one man one women shop in New Hampshire.
Queen Ann Chest on Frame
- Posted on Monday, March 22, 2010 - 1 comment
After 30 years working as a carpenter this is my first attempt at furniture making. It took nearly a year on and off in my spare time. After all that time and effort there was no doubt that I wanted the very best hardware for the finishing touch. Each morning when I open the drawers I appreciate the superior quality of Horton Brasses.
Arts & Crafts Library Table
- Posted on Tuesday, February 2, 2010 - 1 comment
This Arts & Crafts Library Table was built by Robert Fredrickson from ash wood and equipped with your Arts & Crafts drawer pulls. It is a modification of a design by Eric Keil.
Cherry Curio Cabinet
- Posted on Friday, January 15, 2010 - leave a comment
This cherry curio cabinet was built with cherry wood, finished with brushed lacquer and equipped with your Arts & Crafts vertical pulls with cast drops, solid brass butt hinges, ball catches and solid brass shelf pegs.
Pennsylvania Spice Box
- Posted on Saturday, December 5, 2009 - 1 comment
This piece was built by James Platteter of J.P. Fine Furniture. The beautiful design of the compass inlay provided the inspiration to make this exquisite reproduction.
Primary wood - curly cherry. Walnut, Yellow Heart, Padock, Curly Babinga, Black Ebony and Maple stringing. Interior draw fronts out of Tiger Mahogany. Secondary woods, quarter sawn Poplar, White Pine and White Oak.
Approximate measurements: 24 x 16 x 10 inches
To learn more about this piece, visit: www.jpfinefurniture.com
Tiger Maple Low Boy
- Posted on Wednesday, September 30, 2009 - leave a comment
Looking to learn more about woodworking? The Vermont Woodworking School is located in the green mountains in Cambridge Vermont, just north of Smuggler's Notch if you know the area. You can go for a week, or a weekend, it is a great place with great teachers and curriculum. If you need need some other activities to round out the trip the area is full of surprises. In town there is a culinary institute with cooking classes and programs, there is hiking, biking, fishing, and my personal favorite: Smugglers Notch ski resort.
High Boy
- Posted on Sunday, August 23, 2009 - 2 comments
The high boy pictured is one of two that a neighbbor, Lane Gilliam, and I made from rough walnut lumber over the last 8 months. The finishing was done by Marshall Finishing of High Point, NC
Why Horton Brasses?
We make lots of nickel hardware. Want more? We can provide any of our brass hardware in nickel on request. Please contact us for details.
Our Crew
Terry is a native of Tennessee and has worked for us for several years. He makes our long strap hinges, H & HL's, slide bolts, and rattail hinges in addition to doing all of the custom fabrication.
Our Catalog
Our newest 2011 catalog is now available. If you would like a copy, please submit your request.
Your Shopping Cart is Empty
Horton Brasses produces more than 1,000 different pieces of authentic reproduction furniture and cabinet hardware at our factory in Connecticut. We use brass, iron, and various hardwoods to make knobs, drawer pulls, hinges, shelf pegs, bed bolts, casters, hooks and even clock finials!
If you have ordered with an account on our website before, you can log in to view your order history.
Horton Brasses Inc., 49 Nooks Hill Road, Cromwell CT 06416, 800-754-9127