Cast Brass Bin Pulls

Cast brass bin pulls are made by pouring molten brass (1800 degrees or so) into special sand molds. The brass is given time to cool and harden. After that the molds are broken open and the parts are cut off, ground, tumbled, and cleaned up with lots of careful hand work. The process is as spectacular as it is traditional. The end result is a bin pull that is smooth to the touch and feels good to use. Choose from 7 finishes including our new custom satin and polished nickel finishes.

View Pricing Details Below
  • All hardware includes all fasteners needed for installation. You can order extra fasteners if required.
  • Hardware is available in several different finishes. 70% of our products are ordered in the antique finish.
Bookmark and Share
  DescriptionFinishPriceQuantity
VT-73 cast brass bin pull 
DescriptionFinishPriceQuantity
overall size: 2-7/8" x 1-1/4" ·2-3/16" between screws
$8.75
 
 
VT-72 cast brass bin pull 
DescriptionFinishPriceQuantity
overall size: 3-5/16" x 1-1/4" · 2-7/8" between screws
$8.75
 
 
VT-71 cast brass bin pull 
DescriptionFinishPriceQuantity
overall size: 3-5/8" x 1-3/8" · 3-1/4" between screws
$6.00
 
 

Customer Comments and Reviews

Mike NewlonFebruary 28, 2009

Cast Brass Bin Pulls

VT-73. I collect antiques and quality is always important. These pulls are excellent castings with very defined patterns. I chose the polished brass. Excellent buffing. I have purchased pulls from other companies and these are much superior in quality! Check if the size works for you they are a little smaller than I prefer.

VT-73. I collect antiques and quality is always important. These pulls are excellent castings with very defined patterns. I chose the polished brass. Excellent buffing. I have purchased pulls from other companies and these are much superior in quality! Check if the size works for you they are a … 

deva mirelNovember 24, 2009

Cast Brass Bin Pulls

i love the VT-71..had them in my last kitchen on pine shaker cabs stained walnut. it looked lovely and added a very nice decorative touch to my simple kitchen. great quality and great prices. will order again from horton-brasses for my new kitchen remodel (we moved).

William AllikFebruary 9, 2010

Cast Brass Bin Pulls

I just installed VT-71 bin pulls along with other Horton Hardware in my 1890 kitchen. Ordered it all two years ago, but just got the cabinet doors made and hung. The antique finish looks great against the painted white cabinets, and all the hardware is top-quality, heavy, precise casting and finish work. You could special order much worse from a big box and spend twice as much. Thanks Horton!

I just installed VT-71 bin pulls along with other Horton Hardware in my 1890 kitchen. Ordered it all two years ago, but just got the cabinet doors made and hung. The antique finish looks great against the painted white cabinets, and all the hardware is top-quality, heavy, precise casting and finish … 

Add New Comment
Email addresses are not displayed with your comment and will not be shared.

Why Horton Brasses?

Construction. Our hardware reflects the countless hours spent building your masterpiece. Details make the difference.

Our Crew

Mary ships between 40 and 75 orders a day with amazing accuracy, and little help. It is due to Mary, the office, and the entire finishing staff that our policy of shipping all orders in a day or two is possible.

Learn more about Mary Hayes and the rest of our team