Handcrafted in the heart of England, Armac Martin decorative brass grilles bring an ornate elegance to cabinets, panels, doors, vents, or radiator covers. Assembled by hand and precisely trimmed to fit your required aperture, Armac Martin solid brass grilles are designed to showcase a perfectly symmetrical pattern. From Georgian square grilles to Regency diamond grilles, discover the perfect style to complement your design concept. To order, follow the links below to fill out the appropriate form.
Click the images below to start an order for one of the following categories:
Sample boards are available for purchase and require a $300 deposit, fully refundable upon return. 30 Day Return Policy. All samples boards are shipped at no charge.
Joined Grilles Listed below are more images of all the styles you can choose from under the category of Joined Grilles. They include: Regency Diamond, Georgian Square, and Elliptical. You can choose any finish (see "Finishes" below), any rosette (see "Rosettes" below), and if you want mesh backing (see "Mesh" below).
Regency Diamond
Handcrafted in solid brass, Regency Diamond Grilles add an elegant touch to interiors. Featuring a perfectly symmetrical pattern assembled by hand and trimmed to fit your required aperture, your grille will come ready to fit.
Available in three different diamond sizes, each made from a 3.2mm square section brass bar and fitted to hold with decorative pins.
Shown on All Joints
Plain Rosettes
Shown with All Pins
(no rosettes)
Alternating Joint
Floral Rosettes
Alternating Joint
Floral Rosettes
Shown with No Rosettes
(Pinheads only)
Shown with Alternating
Rosettes
Shown with All Rosettes
Every Joint
Georgian Square
Georgian Square Grilles add a touch of finesse to panels, doors, vents,
and more. Handcrafted from solid brass and made to fit into your
required aperture, they come ready to fit.
Available in three different square sizes, each made from a 3.2mm
square section brass bar and fitted to hold with decorative pins.
Shown with Plain
Rosettes Every Joint
Shown with All Pins
Every Joint
Shown with No
Rosettes
Shown with Rosettes
Every Joint
Elliptical
Elliptical pattern grilles add a truly sophisticated look to cabinet doors, radiator covers, and more. Handcrafted from solid brass and made to fit into your required aperture, they come ready to fit.
There are two orientation styles to choose from: Horizontal or Vertical.
The ellipses will stretch to match either the height or width of your required measurements as indicated by the images to the left. Please note: the longer measurement of your required panel needs to run in alignment with the stacked ellipses to achieve the desired look. For example, the height of the vertical grilles should be no longer than the width.
Shown with Floral Rosettes
Every Joint
Shown with Floral Rosettes
Every Joint
Shown with No Rosettes
Every Joint
Shown with All Rosettes
Every Joint
Interwoven Grilles
Diamond
Square
Diamond Interwoven options
A basket weave style hand woven grille, the Diamond Interwoven Grille is available in a number of different aperture and section size configurations and is supplied in a diamond layout with either plain or reeded style sections.
Available in four different diamond sizes.
Plain or Reeded Wire Interwoven grilles are available in both plain and reeded wires with an option of 3mm, 5mm, or 6mm wire width.
Plain Wire
Reeded Wire
Square Interwoven options
A basket weave style hand woven grille, the Square Interwoven Grille is available in a number of different aperture and section size configurations and is supplied in a square layout with either plain or reeded style sections.
Available in four different square sizes, each made from a 3.2mm square section brass bar.
Plain or Reeded Wire Interwoven grilles are available in both plain and reeded wires with an option of 3mm, 5mm, or 6mm wire width.
Plain Wire
Reeded Wire
Double Interwoven Grilles
Rectangle
Diamond
Square
Double Square Interwoven options
A basket weave style hand woven grille, the Double Square Interwoven Grille is available in a number of different aperture and section size configurations and is supplied in a double square layout with either plain or reeded style sections.
Available in three different square sizes: 1/2", 3/4" and 1".
Each is made from a 3.2mm square section brass bar and fitted to hold with decorative pins.
Plain or Reeded Wire Double Interwoven grilles are available in both plain and reeded wires with a 3mm width.
Plain Wire
Reeded Wire
Double Diamond Interwoven options
A basket weave style hand woven grille, the Double Diamond Interwoven Grille is available in a number of different aperture and section size configurations and is supplied in a double diamond layout with either plain or reeded style sections.
Available in three different diamond sizes: 1/2", 3/4", 1"
Plain or Reeded Wire Interwoven grilles are available in both plain and reeded wires with a 3mm width.
Plain Wire
Reeded Wire
Double Rectangular Interwoven options
Horizontal
Vertical
A basket weave style hand woven grille, the Double Rectangular
Interwoven Grille is available in two orientations and is supplied
in a double rectangular layout with either reeded or plain style sections.
Available in horizontal or vertical style.
Available size: 1/2" by 1/8" only.
Plain or Reeded Wire Double Rectangular Interwoven grilles are available in both plain and reeded wires with a 3mm width.
Plain Wire
Reeded Wire
Perforated Grilles The decorative perforated sheet grilles are used in kitchens as radiator covers or on interior doors. They are available in standard full sheets, 2m x 1m. Each perforated sheet has a small border. Each sheet has an added thickness when mesh is added. They are available in Aluminum, self-color only.
Large Cross
Small Cross
Large Club
Small Club
Interlocking Circles
Diamond
Honeycomb
Square
Metal Frames All the grilles featured can be supplied with an added metal frame. There are four frame options: Angle, Channel, Flat, and T section. All can be supplied with either a 12.7mm, 19.1mm, or 25.4mm face width. Frames are made from a solid brass 3.2mm thick section and can be finished to match the grille required. Screw holes can be added to the face of the frame for fixing if required.
Angle Section
Channel Section
Flat Section
T Section
Angle Section
attached to grille
(side view)
Channel Section
attached to grille
(side view)
Flat Section
attached to grille
(side view)
T Section
attached to grille
(side view)
Mesh Mesh is used with decorative grilles as a backing, but it can also be applied alone when something simple is required. Both styles (fine and open mesh) are available to cut to size and also on a roll about 4ft high. Mesh comes in either 1.6mm or 3.2mm thick, and can be Brass or Stainless Steel. Finishes available on Brass material ONLY.
Fine Mesh Brass
Square Holes 1.6mm Internal
Open Mesh Brass
Square Holes 3.2mm Internal
Fine Mesh Stainless Steel
Square Holes 1.6mm Internal
Open Mesh Stainless Steel
Square Holes 3.2mm Internal
Rosettes There are two styles of rosettes to choose from. Below, you will find examples of Floral rosettes, Plain rosettes, and Pinheads only. Rosettes can adorn your grilles on every joint, alternating joints, or simply choose to have every joint be a Pinhead only.
Floral - Alternating Joints and Every Joint
Shown with Floral
Rosettes Every Joint
Shown with Floral
Rosettes Every Joint
Shown with all
Rosettes Every Joint
Shown with Alternating
Joint Rosettes
Plain - Alternating Joints and Every Joint
Shown with Plain
Rosettes Every Joint
Shown with all Rosettes
Every Joint
Shown with Alternating
Joint Rosettes
Pinheads Only (no rosettes)
The pinheads are used to assemble the grilles and are clipped at the back and hammered over to create a cleaner look. They are only offered when grilles have no mesh backing. They cannot be offered on grilles with polished nickel, polished chrome, or BMA.
Shown with All Pins
Every Joint
(no rosettes)
Shown with All Pins
Every Joint
(no rosettes)
Available Finishes Armac Martin's expertly crafted luxury brass grilles come in ten beautiful finishes. These can be applied to all brass grilles, however they are not suited to stainless steel or aluminum grilles. Please note, Antique Brass and Bronze Metal Antique finishes can vary slightly from order to order, as these are hand-finished. Antique Brass, Antique Copper, Bronze Metal, and Antique Nickel are all lacquered and it is not an option to have them un-lacquered. The Brass finish can be lacquered or un-lacquered.
Mixed Finishes Grilles without rosettes can only be satin brass and satin brass lacquered, but with a backing mesh in any other finish. Grilles with alternating rosettes can be mixed with two finishes (excluding BMA). The grille is one finish and the mesh and rosettes a different finish. Grilles with rosettes on all joints cannot be offered in a mixed finish.
