Bed bolts hold the posts and rails of pencil post and other poster beds together. A billet of 3/8" diameter steel is hot forged to create a 3/8" square head with a built in 15/16" flange. Each is supplied with a 3/4" square nut. Our bolts and nuts all have 16 threads per inch (T.P.I.). Most beds use 8 bolts, some use only 4.
Just what I needed!, December 3, 2019 By Kit O'Neill (Woodstock, GA)(Verified)
Exactly what I needed, great price and quick delivery
Steel Bed Bolt, October 30, 2019 By Anonymous (Springfield, VA)(Verified)
The bed bolts were perfect and we were able to put the bed together after misplacing the bolts for over 20 years.
Top quality, August 20, 2019 By Anonymous (Kingston, NC)
Bought these bed bolts to restore an 1850s antique cannonball bed and they worked great. ! Matched the original perfectly. Great to be able to source orgianal hardware to restore it back to its original state . Highly recommend ! Fast shipping to Canada as well ??
Bed hardware, March 20, 2019 By Anonymous(Verified)
Good quality but expensive
Great product! Unusual Use!, April 20, 2016 By Doug (Natick, MA)
I used the bed bolts for a cherry and Granite kitchen table I just completed, (using Horton Brasses 6" bed bolts and satin nickel bed bolt covers, for the corner joints). A little unusual to use bed bolts for a kitchen table, but it needed to be very strong to support the weight of the 250 pound granite top, and the bed bolts, along with stub tenons on the table apron and mortised legs, did the trick! The satin nickel finish on the bed bolt covers complement the same finish detail on our kitchen cabinet hinges and handles, helping to tie the room together. Terrific service as always from Horton Brasses!
Steel bed bolts, December 2, 2015 By Paul (Grand Rapids, MN)
These bed bolts are the best authentic bolts for both beds and Shaker trestle tables. Thanks for another great product!
Perfect Match, November 27, 2015 By Jim Allen (Middletown, OH)
Bought these to replace bolts for an antique bed frame lost in a move. I could have gotten carriage bolts and square nuts at a hardware store or home center, but wanted to maintain the authenticity of the bed, since it is a valuable antique. These bolts were a perfect copy of the lost bolts and I was grateful to find them on your website. Ordering was easy and shipping was very quickI had them in hand in about 4 days.
Bed Bolts, October 11, 2015 By Anonymous (East Sandwich, MA)
Great product. Arrived quickly and packaged well.
Great product unbelievable delivery, July 15, 2015 By Richard (Morayfield, QLD,AUST)
Received my second set of bed bolts in less than a week...all the way to Australia!
Built a bed of grey ironbark (heavier than water) a year or two ago using (4) of the same bed bolts. The bed is still ROCK SOLID.
The best there is., June 30, 2015 By Anonymous (Ferintosh)
These bed bolts are the best bed hardware on the market. I have not found a way of assembling a bed that is as strong or as durable as using these.
3/8" Square Head Bolts, September 30, 2014 By Anonymous (Stuart, VA)
We used these bolts on an old rope bed and they worked fine. We would not hesitate to order from this company again.